Posted   by 

Great Planes Slot Machine Gpmr4010

Great Planes Slot Machine Hinge Slot Cutter GPMR4010

This is the Slot Machine Motorized Hinge Slotting Tool from Great Planes. Now Kit Building's Biggest Chore Takes Almost No Time At All! *** One Year Warranty ***

GPMR4010 Great Planes Slot Machine Hinge Slot Cutter. This is the Great Planes Slot Machine Hinge Slotting Tool. This motorized hinge slot cutter will do that ugly task in a matter of seconds. This has a one-year warranty. The Slot Machine. Great Planes Slot Machine Hinge Slot Cutter GPMR4010 Quickly Cuts Clean, Straight Perfect Hinge Slots Without Gouging Or Being Hindered By Hard Spots In The Wood (see COMMENTS). Unique Counter-Sawing Dual-Blade Action Removes Wood To Form A Perfect Hinge Pocket. Safer and More Precise Than Cutting Hinge Slots With A Hobby Knife. Great-Planes Product Number: GPMR4010; Out of Stock. The Slot Machine works far better than a hobby knife for making slots in thin balsa and fragile structures.

Great Planes Slot Machine

Features

  • Great Planes Slot Machine Hinge Slot Cutter GPMR4010

  • Quickly Cuts Clean, Straight Perfect Hinge Slots Without Gouging Or Being Hindered By Hard Spots In The Wood (see COMMENTS).

  • Unique Counter-Sawing Dual-Blade Action Removes Wood To Form A Perfect Hinge Pocket.

  • Safer and More Precise Than Cutting Hinge Slots With A Hobby Knife.

  • Rugged, Injection-Molded Body Offers A Comfortable Grip, Comes Fully Assembled and is Ready-To-Use.

  • Blades Pre-Installed For CA Hinges and OPTIONAL Nylon Blades are Available (GPMR4016).

  • Low-Profile Safety Switch Ensures That Power Will Be Turned 'On' Only When The Tool Is In Use.

  • US Patent# 6,096,357

Specifications

  • Voltage: 110/120, 50-60Hz AC

  • AC Cord: 57'

  • Case Size: 3-7/8' (Face of Cutting Side)

  • 4-1/4' (Front to Back)

  • 2' (Grip of Handle-Side to Side)

  • 1-5/8' (Thickness-Top to Bottom)

  • Blade mounting screws: 2.9 x 4.5mm

  • Included Blade for CA Hinges:

  • Length of Blade: 3/4'

  • Total Thickness: 0.016' (0.4mm)

  • Blade Cutting Depth: 0.719'

  • (OPTIONAL) Blades for Nylon Hinges:

  • Length of Blade: 3/4'

  • Total Thickness: 0.024' (0.6mm)

  • Blade Cutting Depth: 0.719'

  • (OPTIONAL) Blades for Heavy Duty Nylon Hinges:

  • Length of Blade: 1-5/8'

  • Total Thickness: 0.037'

  • Blade Cutting Depth: 0.729'

Planes

Contents

  • One Ready-To-Use Slot Machine Motorized Hinge Slotting Tool with blade for CA hinges already installed.

  • One Instruction/Operation Sheet.

Requirements

  • Center Locator GPMR4005, To Find The Exact Center For Hinge Slot.

  • Safety Goggles or Glasses.

  • AC Household Outlet.

Comments

  • Highly recommended to practice making slots on scrap balsa before using the Slot Machine on your model. The Slot Machine works far better than a hobby knife for making slots in thin balsa and fragile structures because you do not have to push so hard while cutting. One thing to be aware of is when cutting into thin material, the possibility is greater of the blades coming out of the wood during the cut, due to misalignment or technique.

  • Blades: Replacement Blades: GPMR4015 for CA Hinges (comes stock) Slot Machine Cuts Slots To Accommodate Most Hinges and Tail Gear Brackets Such As: Great Planes, Sullivan, Goldberg (Klett), Sonic-Tronics and Dubro (except for the cotter pin hinges-slot will have to be deepened 1/16' more). (The thicker blades for nylon hinges will produce a slot that is the right thickness, but NOT DEEP ENOUGH for the Dubro heavy duty hinges. The difference in depth is .08' (a little under 3/32'). In many cases, the modeler can cut 3/32' off the tabs of heavy duty hinges, and use the slots cut by the Slot Machine.) OR modeler can use GPMR4017 heavy duty hinge blades. Optional Blades: GPMR4016 for Nylon Hinges or Tail Gear Brackets. Length of Blade: 3/4' Total Thickness: 0.024' (0.6mm) Blade Cutting Depth: 0.179' Optional Blades: GPMR4017 for Heavy Duty Nylon Hinges Length of Blade: 1-5/8' Total Thickness: 0.037' Blade Cutting Depth: 0.729' Blade changes are simple by removing only four phillips head screws. (a soldering iron may be used to heat the locktight on the screws)

  • Safety Precautions: Blades are sharp: Keep Out Of Reach Of Children, use safety equipment, secure parts being cut, use for hobby use only.